UFO Drip All Conditions is a liquid wax chain coating designed for a range of riding conditions. It helps reduce friction, protect the chain and keep it clean.
Instructions
- Shake the bottle thoroughly before use.
- For a new chain or the first application, clean the chain thoroughly and make sure it is completely dry.
- Slowly rotate the chain while applying UFO Drip All Conditions wax coating directly to the chain rollers above the cassette. Coat the full length of the chain twice.
- Next, apply the coating to the inside of the chain, along the rollers on the lower chain span. Coat the full length of the chain twice. A complete application uses about 8 ml, or an 8 g difference by weight.
- For better penetration between the chain rollers and links, continue turning the cranks for 30 to 60 seconds.
- For better durability and clean performance, leave the coating to dry overnight.
- Wiping wax off the chain surface is not recommended. A properly coated chain generally remains protected for 300 km / 180 miles in dry and clean conditions.
- For a standard reapplication, wipe surface dust off with a clean towel, then apply UFO coating to the links above the cassette, twice along the full length of the chain.
- If the drivetrain has been contaminated, the bike has been washed or it has been ridden in wet conditions, a thorough clean and reapplication following the first-application instructions is recommended. For frequent wet-weather riding, UFO Drip Wet Conditions is recommended.
- Keep out of direct sunlight and store at 5–30 °C (30–85 °F). Do not freeze.
Technical details
- Capacity: 100 ml
- Gross weight: 114 g