Description
Universal grip tape for the ski grip zone, containing fluorine for improved grip. One application lasts up to 250 km.
- Temperature range: -1°...-20°C
- Suitable for all types of snow
- Easy to use
- Package: 5 m; enough for 2–3 pairs of skis
Instructions for use
See also the diagram included in the package.
- Thoroughly clean the ski grip zone (30–50 cm in the middle of the skis) with a degreaser (see the kit instructions). Make sure the area is completely dry after cleaning.
- Sand the cleaned area with the sandpaper on the side of the product, side A (see the drawing on the packaging). Sand the entire grip zone properly, first across and then lengthwise.
- Place the end of the Grip Tape at the beginning of the sanded grip zone and press it down. Apply the lubricating strip of Grip Tape over the entire ski grip zone.
- Cut the Grip Tape as follows: press your fingers onto the brake, side C. Lift the box upwards. Press side D against the lubricating strip. Twist the cut end twice.
- To prevent air bubbles between the lubricant and the ski surface, firmly smooth side E over the entire Grip Tape.
- Remove the paper with a quick pull. If any air bubbles remain, replace the paper, smooth again with side E, and remove the paper.
- Cool the skis outdoors. Do not touch the lubrication area with your hands or press the skis together so that the lubrication areas touch.