Rear mudguard Ass Savers Win Wing 2 Gravel Bits ́N ́ Peaces

The Win Wing protects against water and mud that leave the wheel in a straight line from the point where the tire releases them. By covering only the upper rear quarter of the wheel, the mudguard helps shield the rider’s critical areas while using a minimum amount of material.

Installation and position

For the coverage to work properly, install the mudguard as close to the wheel as possible. For maximum coverage, leave 5-10 mm of clearance between the tire and mudguard.

The angle of the blade is just as important. It has three different settings to accommodate the angle of the seat stays. Choose a horizontal or tail-up position. Avoid a tail-down angle, as this reduces the mudguard’s efficiency.

The straps are made from tough TPU. Pull them as tight as is comfortable by hand. If the mudguard is not stable, try the next hole in the strap.

Frame protection and construction

Soft rubber feet gently hug the frame. However, anything attached to a bike for an extended period may leave marks. To maintain the bike’s new appearance, apply protective tape where the Win Wing is attached.

The mudguard’s design allows it to flex in the event of an accident. It is also designed not to jam if larger pieces of debris get caught in the wheel.

If you want to leave the mudguard attached to your bike permanently, you can secure it with a standard zip tie through the designated slot.

The simple construction consists of only four components (competitors’ products may use as many as 40). The glassfiber-reinforced wishbone holder is flexible and tough, and the rubber straps are highly durable.

Preparing for use

Pre-folding the flat piece of plastic is necessary to turn it into a functioning mudguard. The scoring lines are engineered to provide locking mechanisms, self-centering, spring loading and material endurance. For best performance, take the time to read the instructions carefully or watch the instruction video.

Sustainability

The black blade is made from 80% recycled PP. The Win Wing is designed for efficient shipping and easy recycling. The wishbone and blade can be purchased separately, making repairs and upgrades convenient. The Win Wing is 100% made in Sweden in ISO 14001-certified factories.

Technical data

• Measures: 375 x 85 mm
• Weight: 72 g
• Fits tires up to 60 mm wide
• Blade thickness: 0.9 mm
• Materials: blade – PP (polypropylene); wishbone holder – glassfiber-reinforced PA (polyamide or nylon); strap – TPU (thermoplastic polyurethane).