Tyre Maxxis 27.5 x 2.50 WT Aggressor TR

The Maxxis Aggressor is designed for fast riding on hard surfaces and rocky trails. It is particularly suitable for rear-wheel use with a Minion DHF or Assegai at the front.

• Category: Trail, Enduro
• Intended use: riding on dry, rocky trails
• Recommended position: rear
• ETRTO size: 63-584
• Rubber compound: dual compound
• Puncture protection: EXO
• Weight: 1023 g
• Maximum pressure: 50 PSI
• Casing density: 60 TPI
• Tyre type: folding, tubeless
• Suitable for e-bikes travelling at speeds of up to 25 km/h

Technologies

DUAL COMPOUND
Two different rubber compounds make up the tread. They reduce rolling resistance and provide good cornering control.

EXO puncture protection
EXO is a cut- and abrasion-resistant material used on the sidewalls of many Maxxis mountain bike and gravel tyres. This dense material is lightweight and highly flexible, so it does not affect tyre performance. Choose EXO protection for durable tyres for gravel, XC or easier forest trails.

TUBELESS READY
Tubeless tyres allow riders to use lower tyre pressures, which improves grip, and offer lower rolling resistance than tyres with inner tubes. If a tyre is punctured, it loses pressure more slowly because there is no inner tube. Tubeless tyres are marked “TR” on the sidewall.

WIDE TRAIL (WT)
The Wide Trail (WT) design optimizes tread layout and profile on modern, wider rims. Traditional tyres are designed for older, narrower rims and can have a distorted profile, which reduces performance. WT tyres are optimized for a 35 mm internal rim width, but are also suitable for rims 30–35 mm wide.

Maxxis Wide Trail XC tyres are optimized for use with rims that have a 30 mm internal width, but also perform well on narrower rims down to 25 mm. Maxxis does not recommend rims wider than 30 mm or narrower than 25 mm.